Getting power from iRobot Create Command Module? | 1 | True | Pi Robot | 2011-03-07 08:59:13 | 2011-03-07 18:23:15
|
move_base node dies - can't tell why | 1 | True | Pi Robot | 2011-03-08 19:50:53 | 2011-04-18 21:17:06
|
gmapping + iRobot Create + Hokuyo laser scanner | 1 | True | Pi Robot | 2011-03-22 20:02:14 | 2011-03-23 00:26:58
|
Covariance/filter errors when launching robot_pose_ekf + iRobot Create | 1 | True | Pi Robot | 2011-03-25 07:46:51 | 2011-03-25 08:34:35
|
ROS natively on the iRobot Create Command Module | 2 | True | hawesie | 2011-03-28 01:26:28 | 2011-03-28 10:40:36
|
RGB-6D-SLAM performance on a robot | 1 | True | Mac | 2011-04-20 13:42:23 | 2011-05-02 14:14:02
|
Calibrating turtlebot odometry without gyro/imu | 1 | True | Marco | 2011-08-10 06:32:30 | 2011-08-10 15:14:05
|
Create not going forward | 1 | True | NeuralJuiceBox | 2011-09-06 15:50:41 | 2011-09-09 11:04:17
|
Cant get data from Create robot - Error reading from SCI port ttyUSB0 | 1 | True | chopchop | 2011-11-28 17:20:44 | 2011-12-06 20:43:04
|
Is there any functional reason for the wheel joints to be continuous instead of fixed? | 1 | True | ChrisL8 | 2014-07-14 21:42:30 | 2014-07-14 21:49:12
|